Supplies desired Air – CO2 or N2 – O2 – CO2 (triple gas) mixture at controlled pressure
Can supply triple gas to 10 Bench top incubators
Very easy to set, measure & calibrate
Get freedom from premixed tanks
Guaranteed savings in operation cost
Centralized gas mixer capable to supply desired gas to multilple equipment
One unit supplies up to 1.6 l/min of mixed gas
Mixes two or three gas, according to operator's need, with mass flow controllers
Can be manually calibrated with any CO2 and O2 meter
Can be equipped with CO2 and O2 Okolab Concentration Meter for automatic calibration and closed loop feedback on gas composition.
It replaces pre-mixed tanks
CO2 O2 UNIT BL CP2
User Manual
User interface touch pad
Cylinder
Tri – gas mixture Accessiores
Control unit
A touch Screen with magnetic pad
A Tank
Tank support
#4 push in to fit connectors with ¼ NPT MALE THREAD WITH AN O- RING FOR 6 MM O.D. RIGID TUBING
#3 White Teflon made tubes of 6 mm O.D, 10 METERS LONG
#3 Pressure gauges with filter, regulator and assembly strirrup for co2, Air and N2
#1 pressure guage with regulator and assembly stirrup with end of scale of 2.0 barg(guage)
#1 yellow 1.5 meter long tube made by polyurethane
#1 Blue 1.5 meter long tube made by polyurethane
#1 manifold with 1 input port and 3 output ports for 6 mm O.D Tubing
#1 mini USB cable
#1 power supply cable
Tri- gas Mixer with the CO2/O2 Analyser
Control unit
A touch Screen with magnetic pad
A Tank
Tank support
#4 push in to fit connectors with ¼ NPT MALE THREAD WITH AN O- RING FOR 6 MM O.D. RIGID TUBING
#3 White Teflon made tubes of 6 mm O.D, 10 METERS LONG
#3 Pressure gauges with filter, regulator and assembly strirrup for co2, Air and N2
#1 pressure guage with regulator and assembly stirrup with end of scale of 2.0 barg(guage)
#1 yellow 1.5 meter long tube made by polyurethane
#1 Blue 1.5 meter long tube made by polyurethane
#1 manifold with 1 input port and 3 output ports for 6 mm O.D Tubing
#1 mini USB cable
#1 power supply cable
Tee Connector
Co2/O2 Analyser
#1 Tranasparent polyurethane tube with valved in – line connector, 6 mm OD, 1.5 meters long
#1 RS232 serial cable
#1 5VDC Power supplier/Feeder
Tri- gas Mixer with the CO2/O2 Analyser and Junction Box
Control unit
A touch Screen with magnetic pad
A Tank
Tank support
#4 push in to fit connectors with ¼ NPT MALE THREAD WITH AN O- RING FOR 6 MM O.D. RIGID TUBING
#4 White Teflon made tubes of 6 mm O.D, 10 METERS LONG
#3 white Teflon made tubes of 6 mm O.D, 1.5 meters long
#1 yellow 1.5 meter long tube made by polyurethane
#1 Blue 1.5 meter long tube made by polyurethane
Co2/O2 Analyser
# 1 pressure guage with regulator and assembly strirrup with end of scale of 2.0
Barg(gauge)
#1 Pressure gauges with filter, regulator and assembly strirrup for co2, Air &N2
#1 pressure guage with regulator and assembly stirrup with end of scale of 2.0 Barg(gauge)
#1 manifold with 1 input port and 3 output ports for 6 mm O.D Tubing
#1 Blue 1.5 meter long tube made by polyurethane
#1 Transparent polyurethane tube with valved in-line connector,6 mm OD, 1.5 meters long,
#1 mini USB cable
#1 power supply cable
#1 5VDC Power supplier/Feeder
Junction Box
